LWGY series turbine flow sensor (hereinafter referred to as sensor) is a speed-type flow meter based on the principle of torque balance.When the fluid flows through the sensor housing, the blade of the impeller has a certain Angle with the flow direction, and the momentum of the fluid makes the blade have a rotating torque. After overcoming the friction torque and fluid resistance, the blade rotates, and the rotating speed is stable after the torque is balanced.Under certain conditions, the rotation speed is proportional to the flow rate. Since the blade has magnetic conductivity, it is in the magnetic field of the signal detector (composed of permanent magnetic steel and coil). The rotating blade cuts the magnetic field lines and periodically changes the magnetic flux of the coil, so that the two ends of the coil can sense the electric pulse signal.The signal is amplified and shaped by the amplifier to form a continuous rectangular pulse wave with a certain amplitude, which can be transmitted to the display instrument to display the instantaneous flow or total amount of the fluid.Within a certain flow range, the pulse frequency f is proportional to the instantaneous flow rate Q of the fluid flowing through the sensor, and the flow equation is:
Q=3600*f/k
In the formula:
f--pulse frequency [Hz]
k--the meter factor of the sensor [1/], given by the checklist.
Q-- instantaneous flow rate of fluid (under working condition) [/h]
3600--Second conversion coefficient
The instrument coefficient of each sensor is filled in by the manufacturer in the verification certificate, and the value of k is set in the supporting display instrument to show the instantaneous flow and cumulative total.
It is suitable for measuring liquid in closed pipe which has no corrosive effect with stainless steel , corundum and hard alloy and has no impurities such as fiber and particle. It is widely used in petroleum, chemical, metallurgy, water supply, papermaking and other industries. It is an ideal meter for flow measurement and energy saving.Can measure pure water, again incoming water, pure water, medicine dregs, milk, soybean oil, edible oil, diesel oil, lubricating oil, diesel oil, aviation oil.
FeaturesQ=3600*f/k
In the formula:
f--pulse frequency [Hz]
k--the meter factor of the sensor [1/], given by the checklist.
Q-- instantaneous flow rate of fluid (under working condition) [/h]
3600--Second conversion coefficient
The instrument coefficient of each sensor is filled in by the manufacturer in the verification certificate, and the value of k is set in the supporting display instrument to show the instantaneous flow and cumulative total.
It is suitable for measuring liquid in closed pipe which has no corrosive effect with stainless steel , corundum and hard alloy and has no impurities such as fiber and particle. It is widely used in petroleum, chemical, metallurgy, water supply, papermaking and other industries. It is an ideal meter for flow measurement and energy saving.Can measure pure water, again incoming water, pure water, medicine dregs, milk, soybean oil, edible oil, diesel oil, lubricating oil, diesel oil, aviation oil.
1. Simple structure and convenient reading.
2. Lightweight, high precision and good repeatability.
3. Responsive, easy to install and maintain.
2. Lightweight, high precision and good repeatability.
3. Responsive, easy to install and maintain.
| LWGY | Explain | |||||
| Classify | LWGY | Basic model,+5-24DCV power supply | ||||
| LWGYA | Two-wire system current output, remote transmission | |||||
| LWGYB | Battery powered field display | |||||
| LWGYC | field display/Two-wire system current output | |||||
| LWGYD | RS485 communication output | |||||
| Inside nominal diameter | 4 | 4mm,general turbine flow range 0.04~0.25m3/h | ||||
| 6 | 6mm,general turbine flow range 0.1~0.6m3/h | |||||
| 10 | 10mm,general turbine flow range 0.2~1.2m3/h | |||||
| 12 | 12mm,general turbine flow range 0.2~2m3/h | |||||
| 15 | 15mm,general turbine flow range 0.6~6m3/h | |||||
| 20 | 20mm,general turbine flow range 0.7~7m3/h | |||||
| 25 | 25mm,general turbine flow range 1~10m3/h | |||||
| 32 | 32mm,general turbine flow range 1.5~15m3/h | |||||
| 40 | 40mm,general turbine flow range 2~20m3/h | |||||
| 50 | 50mm,general turbine flow range 4~40m3/h | |||||
| 65 | 65mm,general turbine flow range 7~70m3/h | |||||
| 80 | 80mm,general turbine flow range 10~100m3/h | |||||
| 100 | 100mm,general turbine flow range 20~200m3/h | |||||
| 125 | 125mm,general turbine flow range 25~250m3/h | |||||
| 150 | 150mm,general turbine flow range 30~300m3/h | |||||
| 200 | 200mm,general turbine flow range 80~800m3/h | |||||
| Anti-explosion | No mark, non - explosive type | |||||
| B | Anti-explosion | |||||
| Accuracy class | A | Accuracy 0.5 grade | ||||
| B | Accuracy 1 grade | |||||
| Turbine type | A | Wide range turbine Ordinary turbine | ||||
| B | ||||||
| Flow diameter mm | Range of flow m3/h | Connection type |
| DN 4 | 0.04~0.25 | Thread/hoop |
| DN 6 | 0.1~0.6 | Thread/hoop |
| DN 10 | 0.2~1.2 | Thread/hoop/flange |
| DN 15 | 0.2~2 | Thread/hoop/flange |
| DN 20 | 0.6~6 | Thread/hoop/flange |
| DN 25 | 0.7~7 | Thread/hoop/flange |
| DN 32 | 1.5~15 | Thread/hoop/flange |
| DN 40 | 2~20 | Flange |
| DN 50 | 4~40 | Flange |
| DN 65 | 7~70 | Flange |
| DN 80 | 10~100 | Flange |
| DN 100 | 20~200 | Flange |
| DN 125 | 25~250 | Flange |
| DN 150 | 30~300 | Flange |
| DN 200 | 80~800 | Flange |
Quantitative control systerm is composed of flowmeter ,flow quantity control instrument .solenoid valve and distribution box.
1.Extractable start ,stop ,zero button.
2.Can simultaneously control the opening of the valve and pump
3.Can set 8 constant usage
4.Power outage,continue to quantity according to previous values after reboot.
5.Quickable quantitative number ,quantitative value ,quantitative time
6.Installing a miniature printer to print quantitative data.
7.All Chinese LCD display,easy to operate.
8.Mountable size valve control quantitative ,more accurate.
Kunke has formed the radiation sales system and professional after-sales team to provid the full range of technical support and 24-hour uninterrupted point-to-point fast service for production installation, commissioning and online use, using only after-sales service information stystem, to achieve rapid response for the users and rapid processing market. Now our products have been sold to all provinces and autonomous regions and exported to South Korea, Russia, the United States, Indonesia and other countries.
2.Can simultaneously control the opening of the valve and pump
3.Can set 8 constant usage
4.Power outage,continue to quantity according to previous values after reboot.
5.Quickable quantitative number ,quantitative value ,quantitative time
6.Installing a miniature printer to print quantitative data.
7.All Chinese LCD display,easy to operate.
8.Mountable size valve control quantitative ,more accurate.
Kunke has formed the radiation sales system and professional after-sales team to provid the full range of technical support and 24-hour uninterrupted point-to-point fast service for production installation, commissioning and online use, using only after-sales service information stystem, to achieve rapid response for the users and rapid processing market. Now our products have been sold to all provinces and autonomous regions and exported to South Korea, Russia, the United States, Indonesia and other countries.